<i id="bugry"></i>

      1.  

        WANAN

        PROFESSIONAL VALVE VIE MANUFACTURING

        The user's trust,and constantly satisfy the users'potential demand,ls our thought,but also we are doing…

        高壓調壓閥的作用 The role of high pressure regulator
        來源: | 作者:wanan | 發布時間: 913天前 | 574 次瀏覽 | 分享到:
        一般來說閥門定位器是按照力的平衡原理來設計工作的,它的工作原理就是通過杠桿的轉動來設計的。

        高壓調壓閥這個讓人一開始想到的是閥門,開關,可是它是用來干什么的呢,其實說起來它是一個大類。最為主要的作用就是用來減壓的,很好明白吧!

        一般來說閥門定位器是按照力的平衡原理來設計工作的,它的工作原理就是通過杠桿的轉動來設計的。當它通過波紋管的信號壓力增加時,杠桿需要繞著支點轉動檔板靠近噴嘴。而噴嘴背壓經過放大器放大后,送入薄膜執行機構氣室,使的閥桿向下移動的時候就會帶動反饋桿繞支點來轉動,連接在同一個軸上的反饋凸輪就也跟著作逆時針的方向轉動。

        另一方面就是通過滾輪使杠桿繞支點來轉動,并且將反饋彈簧拉伸、彈簧對杠桿的位力與信號壓力作用的波紋管上的力還到力平衡的時候儀表才會到達平衡的狀態。而在此時,一定的信號壓力就與一定的冷門位置相對應了。而這些方式就叫做正作用,若是要改變作用方式,只要將凸輪翻轉就可以了。

        就簡單點,高壓調壓閥的作用就在于調壓,看著它調壓的原理就基本明白是怎么回事了!


        The high-pressure regulator is a valve and switch that people think of at first, but what is it for? Actually speaking, it is a big category. The most important role is to decompress, it is easy to understand!

        Generally speaking, the valve positioner is designed to work according to the principle of force balance, and its working principle is designed through the rotation of the lever. When the signal pressure through the bellows increases, the lever needs to rotate the baffle around the fulcrum to approach the nozzle. After the nozzle back pressure is amplified by the amplifier, it is sent to the air chamber of the film actuator. When the valve stem moves down, it will drive the feedback rod to rotate around the fulcrum, and the feedback cam connected to the same axis will also reverse. The direction of the hour hand turns.

        On the other hand, the lever is rotated around the fulcrum by the roller, and the force on the bellows acting on the feedback spring, the position force of the spring on the lever and the signal pressure, will not reach the equilibrium state until the force is balanced. At this time, a certain signal pressure corresponds to a certain unpopular position. These modes are called positive action. If you want to change the action mode, just flip the cam.

        Simply put, the role of the high-pressure regulator is to regulate the pressure, and you can basically understand what is going on by looking at the principle of its pressure regulation!

        日本免费网站